DETERMINATION OF THRESHOLD OF ARGILLACEOUS ROCK SEALED HYDROCARBON

Fu Guang; Wang Pengyan; Chen Xin; Wang Yachun

doi:10.11743/ogg19980209

Views : 0 下载量: 1213 CSCD: 0

PDF
Export
Share
Collection
Album

DETERMINATION OF THRESHOLD OF ARGILLACEOUS ROCK SEALED HYDROCARBON
Vol. 19, Issue 2, Pages: 132-135(1998)
Online First：25 June 1998，

Published：1998
DOI： 10.11743/ogg19980209
稿件说明：

移动端阅览

DOI：

Fu Guang, Wang Pengyan, Chen Xin, et al. DETERMINATION OF THRESHOLD OF ARGILLACEOUS ROCK SEALED HYDROCARBON[J]. 1998, 19(2): 132-135. DOI： 10.11743/ogg19980209.

摘要

泥质岩盖层孔隙直径随埋深而减小

只有当其减小到等于或小于油、气分子直径时

泥岩盖层方能对任何相态的油气构成完全封闭

达到封盖油和气的临界点。根据油气分子直径和泥岩盖层孔隙直径随埋深呈函数变化的关系

可分别求出泥岩封盖油和气的门限深度

再根据地层厚度与沉积速率求出对应的门限时期。据Φ

=54.74exp(-0.0009354z)

K=0.136(Φ

)

4.4

/(S

)

和r=√8K/Φ的关系

求出松辽盆地三肇地区泥质岩盖层的封油门限深度为2500～3000m

封气门限深度为5000～5200m.这里所强调的是临界门限

并不排斥在未达到封盖门限深度的情况下

仍能依靠毛管压力、异常孔隙流体压力、烃浓度对油气的有效封盖。

Abstract

The pore diameters of argillaceous caprock decreases as its buried depth increased.Only when the pore diameters are as small as or even smaller than the diameters of oil and gas moleculars

the argillaceous caprock could seal completely every states of hydrocarbon

and reach the sealing critical point.According to this rule

the sealing threshold depths of argillaceous caprock for both oil and gas could be calculated.Then the corresponding threshold time value could be calculated based on bed thickness and the rate of deposition.According to Φ

=54.74 exp(-0.000 935 4z)

K=0.136(Φ

)

4.4

)

and r=√8K/Φ

the critical threshold depth for sealing oil in Sanzhao Region

Songliao Basin should be 2 500-3 000 m

and the critical threshold depth for sealing gas should be 5 000-5 200 m.This does not inclode the sealings of capillary pressure

abnormal pore fluid pressure and dense oil and gas.