Determination of the starting time for measurement of NMR effective porosity in shale oil reservoir: A case study of the Permian Lucaogou shale oil reservoir,Jimusaer sag

Wang Wei; Zhao Yanwei; Mao Rui; Sun Zhongchun; Mu Liwei

doi:10.11743/ogg20190310

Views : 0 下载量: 195 CSCD: 22

PDF
Export
Share
Collection
Album

Determination of the starting time for measurement of NMR effective porosity in shale oil reservoir: A case study of the Permian Lucaogou shale oil reservoir,Jimusaer sag
Vol. 40, Issue 3, Pages: 550-557(2019)
Online First：28 June 2019，

Published：2019
DOI： 10.11743/ogg20190310
稿件说明：

移动端阅览

DOI：

Wang Wei, Zhao Yanwei, Mao Rui, et al. Determination of the starting time for measurement of NMR effective porosity in shale oil reservoir: A case study of the Permian Lucaogou shale oil reservoir,Jimusaer sag[J]. 2019, 40(3): 550-557. DOI： 10.11743/ogg20190310.

摘要

准噶尔盆地吉木萨尔凹陷芦草沟组页岩油储层岩性细，孔喉结构复杂，常规测井评价方法难以准确计算有效孔隙度。为此，选取5种粘土类型共30块砂岩样品，分别测量了氦气孔隙度、不同状态下的核磁T

谱、粘土类型以及含量。通过对配套实验数据的分析，明确了粘土类型对储层核磁T

信号短横向弛豫分量的影响机制。在此基础上，结合实验测量结果以及不同类型粘土束缚水的核磁共振弛豫时间，利用迭代法实现了研究区页岩油储层有效孔隙度的准确计算，并确定起算核磁时间为1.7 ms。该方法的计算结果得到了岩心分析数据以及实际测井资料的验证，应用效果较好，为页岩油储层有效孔隙度评价提供了一种新的技术思路和解决办法。

Abstract

Due to the fine-grained lithology and complex pore throat structure of the Lucaogou shale oil reservoir in Jimusaer sag

Junggar Basin

it is difficult to accurately calculate the effective porosity by conventional logging interpretation methods.To solve this difficulty

30 sandstone samples of five clay types were selected for measurements such as porosity under helium expansion

nuclear magnetic resonance (NMR) T

spectrum under different conditions

type and content of clay.The mechanism of clay type effect on short lateral relaxation component of reservoir NMR T

signal was revealed through the analysis of matching experimental data.Subsequently

combined with the experimental results and the NMR relaxation time of bound water in various clay types

the effective porosity of shale oil reservoirs in the study area was calculated accurately by iteration method.The initial NMR time was determined to be 1.7 ms

which have been verified well by core analysis and actual logging.The study serves as a new technical solution for effective porosity evaluation of shale oil reservoir.