[1] 印森林,陈恭洋,戴春明,等.河口坝内部储层构型及剩余油分布特征——以大港油田枣南断块长轴缓坡辫状河三角洲为例[J].石油与天然气地质,2015,36(4):630-639. Yin Senlin,Chen Gongyang,Dai Chunming,et al.Reservoir architecture and remaining oil distribution in mouth bar-A case study on the braided delta of long-axis gentle slope in Zaonan fault block of Dagang Oilfield[J].Oil & Gas Geology,2003,24(1):630-639. [2] 王凤兰,白振强,朱伟.曲流河砂体内部构型及不同开发阶段剩余油分布研究[J].沉积学报,2011,29(3):512-519. Wang Fenglan,Bai Zhenqiang,Zhu Wei.Study on geological 3D reservoir architecture modeling and distribution of remaining oil of different development stage in meandering reservoir[J].Acta Sedimentologica Sinica,2011,29(3):512-519. [3] 高大鹏,叶继根,李奇等.大庆长垣特高含水期表外储层独立开发方法[J].石油与天然气地质,2017,38(1):181-188. Gao Dapeng,Ye Jigen,Li Qi,et al.An independent development method of low permeability oil thin layers with extreme high water cut in Changyuan Structure,Daqing oilfield[J].Oil & Gas Geology,2017,38(1):181-188. [4] 耿站立,姜汉桥,陈民锋,等.高含水期油藏剩余油潜力定量化表征新方法[J].油气地质与采收率,2007,14(6):100-102. Geng Zhanli,Jiang Hanqiao,Chen Minfeng,et al.A new method for quantitative characterization on remaining oil potential in high water cut oil reservoirs[J].Petroleum Geology and Recovery Efficiency,2007,14(6):100-102. [5] 冯其红,陈月明,姜汉桥等.区块整体调剖效果预测[J].石油大学学报(自然科学版),1997,21(4):32-34. Feng Qihong,Chen Yueming,Jiang Hanqiao,et al.Prediction of performance of profile control in block-wide[J].Journal of the University of Petroleum,China,1997,21(4):32-34. [6] 杨中建,贾锁刚,张立会等.高温高盐油藏二次开发深部调驱技术与矿场试验[J].石油与天然气地质,2015,36(4):681-687. Yang Zhongjian,Jia Suogang,Zhang Lihui,et al.Deep profile correction for redevelopment of high-temperature and high-salinity reservoirs and pilot test[J].Oil & Gas Geology,2015,36(4):681-687. [7] 李东文,汪玉琴,白雷等.深部调驱技术在砾岩油藏的应用效果[J].新疆石油地质,2012,33(2):208-210. Li Dongwen,Wang Yuqin,Bai Lei,et al.Application of Deep Profile Control Technology to Karamay Conglomerate Reservoirs[J].Xinjiang Petroleum Geology,2012,33(2):208-210. [8] 冯其红,齐俊罗,尹晓梅等.大孔道形成与演化过程流固耦合模拟[J].石油勘探与开发,2009,36(4):498-502. Feng Qihong,Qi Junluo,Yin Xiaomei,et al.Simulation of fluid-solid coupling during formation and evolution of high-permeability channels[J].Petroleum Exploration And Development,2009,36(4):498-502. [9] Xiao K,Jiang H Q,Wang Q,et al.Adaptability Study on Plugging Thief Zones with Asphalt Particle in Polymer Flooding Offshore Field.SPE-169931,SPE Trinidad & Tobago Energy Resources Conference,Port of Spain,Trinidad and Tobago,2014:220-230. [10] 肖康,姜汉桥,范英彬等.窄条边水油藏水驱后期孔隙分布及动用特征[J].大庆石油地质与开发,2015,34(3):129-133. Xiao Kang,Jiang Hanqiao,Fan Yingbin,et al.Pore distributions and developed characteristics for the narrow-stripe edge-water oil reservoirs at the late period of the water flooding[J].Petroleum Geology & Oilfield Development in Daqing,2015,34(3):129-133. [11] Flory P J.Principles of Polymer Chemistry[M].New York.Cornell University Press,1953. [12] Meter D M,Bird R B.Tube Flow of Non-Newtonian Polymer Solutions,Parts I and Ⅱ Laminar Flow and Rheological Models[J].AIChE J.,1964878-881,1143-1150. [13] Coats K H.In-situ combustion model[J].Society of Petroleum Engineers Journal,1980,20(06):533-554. [14] 江元翔,高淑红,陈长华.响应面设计法优化腺苷发酵培养基.华东理工大学学报(自然科学版),2005,31(3):309-313. Jiang Yuanxiang,Gao Shuhong,Chen Changhua.Optimization of medium components for adenosine production by bacillus subtilis using response surface design[J].Journal of East China University of Science and Technology (Natural Science Edition),2005,31(3):309-313. [15] 李云雁,胡传荣.试验设计与数据处理[M].北京:化学工业出版社,2005. Li Yunyan,Hu Chuanrong.Experiment design and data processing[M].Beijing:Chemistry Industry Press,2005. [16] 谢宇.回归分析[M].北京:社会科学文献出版社,2010. Xie Yu.Regression analysis[M].Beijing:Social Sciences Academic Press(China),2010. |