塔里木盆地玉北1井背斜带变形特征与形成机制

doi:10.11743/ogg20130212

Abstract

Abstract:

Interpretation of the development process and forming mechanism of Well Yubei 1 anticline belt in the Tarim Basin is an important part of study to map the carbonate reservoirs.Analysis of faults and axial planes of the anticlines reveals that two structural styles occur in the study area.One is positive flower structure which runs through the anticline belt in N-S direction.The other one shows significant difference in structural style between upper and lower structural layers.The upper layer is a symmetry anticline and is controlled by a high angle strike slip fault.The lower layer is a dissymmetry anticline and is controlled by a thrust fault developed along the Cambrian gypsiferous mudstone layer.Well Yubei 1 anticline belt was finalized in the mid-Caledonian period,and experienced at least two regional deformations in the late-Caledonian and late-Hercynian.However,the anticline belt changes along the inclination of the anticline,and is converted from a thrust structure to a strike-slip structure in N-S direction.The anticlines are most highly developed at the intersection of two main faults.The Cambrian gypsiferous mudstone was deposited at its core,resulting in a shear-compression anticline.On this basis,we believe that the Ordovician carbonate sequence not only experienced two stages of uplifting and erosion in the Caledonian and early Hercynian and the high angle and low angle fractures developed in the anticlines formed by shear-compression all which provided good conditions for the karstification.

Key words: forming mechanism, structural style, reservoir type, Well Yebei 1, Tarim Basin

CLC Number:

TE121.1

Yun Jinbiao, Zhou bo, Wang Shurong. Deformation characteristics and forming mechanism of the Well Yubei 1 anticline belt in the Tarim Basin[J]. Oil & Gas Geology, 2013, 34(2): 215-219.

References

[1] 夏义平,徐礼贵,刘万辉,等.地震解释及综合研究中几个问题的探讨[J].石油地球物理勘探,2005,40(增刊1):1-5. Xia Yiping,Xu Ligui,Liu Wanghui,et al.Discussion of some problems between seismic interpretation and reasearch[J].Oil Geophysical Prospecting,2005,40(S1):1-5.
[2] 何登发,杨庚,管树巍,等.前陆盆地构造建模的原理与基本方法[J].石油勘探与开发,2005,32(3):7-14. He Dengfa,Yang Geng,Guan Shuwei,et al.Principles and methodology of structural modeling in foreland basins[J].Petroleum Exploration and Development,2005,32(3):7-14.
[3] Dahlstrom C D A.The upper detachment in concentric folding[J].Bulletin of Canadian Petroleum Geology,1969,17:336-344.
[4] Suppe J.Geometry and kinematics of fault-bend folding[J].American Journal of Science,1983,283:684-721.
[5] Jamison W R.Geometric analysis of fold development in over-thrust terranes[J].Journal of Structural Geology,1989,9:207-219.
[6] Suppe J,Medwedeff D.Geometry and kinematics of fault-propagation folding[J].Eclogae Geologicae Helvetiae,1990,83:409-454.
[7] Mitra S.Fault-propagation folds:geometry,kinematic evolution,and hydrocarbon traps[J].AAPG Bulletin,1990,74:921-945.
[8] Dahlstrom C D A.Geometric constraints derived from the law of conservation volumn and applied to evolutionary models for detachment folding[J].AAPG Bulletin,1990,74:336-344.
[9] Medwedeff D.Geometry and kinematics of an active,laterally propagating wedge thrust,Wheeler Ridge,California[C]//Structural geology of fold and thrust belts.Baltimore:John Hopkins University Press,1992:3-28.
[10] Shaw J H,Hook S C,Suppe J.Structural trend analysis by axial surface mapping[J].AAPG Bulletin,1994,78(5):700-721.
[11] Epard J L,Groshong R H.Kinematic model of detachment folding including limbrotation,fixed hinges and layer-parallel strain[J].Tectonophysics,1995,247:85-103.
[12] Poblet J,Mcclay K.Geometry and kinematics of single-layer detachment folds[J].AAPG Bulletin,1996,80(7):1085-1109.
[13] Erslev E A.Trishear fault-propagation folding[J].Geology,1997,19:617-620.
[14] Hardy S,Ford M.Numerical modeling of trishear fault propagation folding[J].Tectonics,1997,16:841-854.
[15] Allmendinger R W.Inverse and forward modeling of trishear fault-propagation folds[J].Tectonics,1998,17:640-656.
[16] Novoa E,Mount V,Suppe J.Map-view interference of mono-clinal folds[J].Journal of Structural Geology,1998,20:339-353.
[17] 李曰俊,吴根耀,孟庆龙,等.塔里木盆地中央地区的断裂系统:几何学、运动学和动力学背景地质科学[J].地质科学,2008,43(1):82-118. Li Yuejun,Wu Genyao,Meng Qinglong,et al.Fault systems in central area of the Tarim Basin:geometry,kinematics and dynamic settings[J].Chinese Journal of Geology,2008,43(1):82-118.
[18] Finch E,Hardy S,Gawthorpe R.Discrete element modelling of contractional fault-propagation folding above rigid basement fault blocks[J].Journal of Structural Geology,2003,25:515-528.
[19] Shaw J H,Connors C,Suppe J.Seismic interpretation of contractional fault-related folds:an AAPG seismic atlas[M].American Association of Petroleum Geologist's Special Publication,2004:1-270.
[20] Sylvester G.Strike-slip faults[J].Geological Society of America Bulletin,1988,100:1666-1703.
[21] 管树巍,杨海军,韩剑发,等.塔中低凸起的构造属性和解释方法[J].石油与天然气地质[J].2011,32(54):777-785. Guan Shuwei,Yang Haijun,Han Jianfa,et al.Structural properties and interpretation methods of the Tazhong Low Salient[J].Oil & Gas Geology,2011,32(54):777-785.
[22] Shaw J H,Bilotti F,Brennan P.Patterns of imbricate thrusting[J].Geological Society of America Bulletin,1999,111(7):1140-1154.
[23] Wilkerson M S,Dicken C L.Quick-look techniques f or evaluating two-dimensional cross sections in detached contractional settings[J].AAPG Bulletin,2001,85(10):1759-1770.
[24] Johnson K M,Johnson A M.Mechanical analysis of the geometry of forced-folds[J].Journal of Structural Geology,2002,24:401-410.

Deformation characteristics and forming mechanism of the Well Yubei 1 anticline belt in the Tarim Basin

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

[1]	Tianfu Zhang, Lili Huang, Xinfeng Ni, Ran Xiong, Guo Yang, Guangren Meng, Jianfeng Zheng, Wei Chen. Lithological combination, genesis and exploration significance of the Lower Cambrian Wusonggeer Formation of Kalpin area in Tarim Basin: Insight through the deepest Asian onshore well-Well Luntan 1 [J]. Oil & Gas Geology, 2020, 41(5): 928-940.
[2]	Huili Li, Jingjing Li, Sujyu Yang, Zhongyuan Ma. Hydrocarbon accumulation characteristics of the Silurian reservoirs in Shuntuoguole region of Tarim Basin and their exploration significance [J]. Oil & Gas Geology, 2020, 41(5): 941-952.
[3]	Chuntao Guo, Haiqiang Song, Jie Liang, Lingmei Ni. Origin of Cambrian dolomite from Well Milan 1 in Tadong area and its significance to dolomite reservoirs [J]. Oil & Gas Geology, 2020, 41(5): 953-964.
[4]	Bin Wang, Yongqiang Zhao, Sheng He, Xiaowen Guo, Zicheng Cao, Shang Deng, Xian Wu, Yi Yang. Hydrocarbon accumulation stages and their controlling factors in the northern Ordovician Shunbei 5 fault zone, Tarim Basin [J]. Oil & Gas Geology, 2020, 41(5): 965-974.
[5]	Zicheng Cao, Qinghua Lu, Yi Gu, Xian Wu, Donghua You, Xiuxiang Zhu. Characteristics of Ordovician reservoirs in Shunbei 1 and 5 fault zones, Tarim Basin [J]. Oil & Gas Geology, 2020, 41(5): 975-984.
[6]	Chaozhong Ning, Suyun Hu, Wenqing Pan, Zixiu Yao, Yong Li, Wenfang Yuan. Characterization of paleo-topography and karst caves in Ordovician Lianglitage Formation, Halahatang oilfield, Tarim Basin [J]. Oil & Gas Geology, 2020, 41(5): 985-995, 1047.
[7]	Hong Cheng, Jie Zhang, Wenbiao Zhang. Discussion on identification, prediction and development pattern of faulted-karst carbonate reservoirs:A case study of TH10421 fracture-cavity unit in block 10 of Tahe oilfield, Tarim Basin [J]. Oil & Gas Geology, 2020, 41(5): 996-1003.
[8]	Daxiang He, Youjun Tang, Jinjie Hu, Shaowu Mo, Jianfa Chen. Geochemical characteristics of noble gases in natural gases from the Tarim Basin [J]. Oil & Gas Geology, 2020, 41(4): 755-762.
[9]	Yao Yao, Zhiliang He, Huili Li, Yu Zhang, Xiaopeng Gao, Kangning Wang, Cunli Jiao. Sedimentary geological model and distribution prediction of source rocks in the Saergan Formation(Middle-Upper Ordovician) in Awati fault depression, Tarim Basin [J]. Oil & Gas Geology, 2020, 41(4): 763-775.
[10]	Kedan Zhu, You Zhang, Tong Lin, Yachun Wang, Xingping Zheng, Lin Zhu. Pore-throat heterogeneity in dolomite reservoirs based on CT imaging: A case study of the 3rd member of the Ordovician Yingshan Formation in Well GC601 in Gucheng area, eastern Tarim Basin [J]. Oil & Gas Geology, 2020, 41(4): 862-873.
[11]	Feng Jianwei, Sun Jianfang, Zhang Yajun, Dai Junsheng, Wei Hehua, Quan Lianshun, Ren Qiqiang, Zhao Libin. Control of fault-related folds on fracture development in Kuqa Depression,Tarim Basin [J]. Oil & Gas Geology, 2020, 41(3): 543-557.
[12]	Sun Funing, Hu Wenxuan, Hu Zhongya, Liu Yongli, Kang Xun, Zhu Feng. Impact of hydrothermal activities on reservoir formation controlled by both faults and sequences boundaries: A case study from the Lower Ordovician in Tahe and Yubei areas,Tarim Basin [J]. Oil & Gas Geology, 2020, 41(3): 558-575.
[13]	Yan Liang, Ji Miao, Jia Baoqian, Chen Xiaotong, Gao Ping. Microbial characteristics of Shunbei faulted-karst reservoirs and prediction of play fairways,Tarim Basin [J]. Oil & Gas Geology, 2020, 41(3): 576-585.
[14]	Peng Wang, Linghui Sun, He Wang, Zi'an Li. Microscopic pore structure of Ahe tight sand gas reservoirs of the Low Jurassic in Kuqa Depression and its controls on tight gas enrichment [J]. Oil & Gas Geology, 2020, 41(2): 295-304.
[15]	Lijuan Cheng, Zhong Li, Jiaqing Liu, Jingbo Yu. Diagenesis and physical properties of subsalt dolomite reservoirs of the Cambrian, Bachu-Tazhong areas, Tarim Basin [J]. Oil & Gas Geology, 2020, 41(2): 316-327.