石油与天然气地质 ›› 2009, Vol. 30 ›› Issue (4): 405-411.doi: 10.11743/ogg20090403

• 烃源岩与油气资源评价 • 上一篇    下一篇

辽东湾凹陷石油运聚成藏过程中运载层残留油量计算关键参数的求取

田立新1, 武丽2,3, 姜振学2,3, 周晶晶2,3, 姚蕾蕾2,3   

  1. 1. 中国石油大学石油与天然气成藏机理教育部重点实验室, 北京, 102249;
    2. 中国石油大学盆地与油藏研究中心, 北京, 102249;
    3. 中海石油(中国)有限公司, 天津分公司, 勘探开发研究院, 天津, 300452
  • 收稿日期:2009-05-21 出版日期:2009-08-25 发布日期:2012-01-16
  • 基金项目:

    中海石油(中国)有限公司项目(SC06TJ-TQL-004).

Method for obtaining key parameters for calculating residual oil amount in carrier beds after oil migration and accumulation in the Liaodong Bay Depression

Tian Lixin1, Wu Li2,3, Jiang Zhenxue2,3, Zhou Jingjing2,3, Yao Leilei2,3   

  1. 1. Key Laboratory for Hydrocarbon Accumulation Mechanism, Ministry of Education, Beijing 102249, China;
    2. Research Center for Basin and Reservoir, China University of Petroleum, Beijing 102249, China;
    3. Exploration and Developmen Research Institute, CNOOC Tianjin Company, Tianjin 300452, China
  • Received:2009-05-21 Online:2009-08-25 Published:2012-01-16

摘要:

以辽东湾凹陷为例,针对古近系沙河街组一、二段储层,通过地质统计方法及储层残留烃量与储层物性等数据的地质分析,根据油气在烃源灶内和灶外的残留特征,结合运载层油柱浮力与孔隙毛管压力的关系,确定残留油柱高度,并对运载层残留油量进行了计算.结果表明,辽东湾凹陷沙河街组一、二段运载层残留油量在1.84×108~2.59×108t,约占排烃量的7.4%~10.4%.储层滞留烃是油气二次运移过程中的主要损耗方式,残留油量计算模型关键参数的获得对于预测结果的准确性具有重要的影响.

关键词: 孔隙度下限, 石油运聚范围, 残留油柱高度, 残留油量, 辽东湾

Abstract:

The 1st and 2nd member of the Paleogene Shahejie Formation (E3s1 and E3s2) in the Liaodong Bay depression were taken as examples.We performed geologic and statistical analyses on the residual hydrocarbons and physical properties of the reservoirs.Based on the characteristics of residual hydrocarbons inside and outside the hydrocarbon kitchen and in combination with the relationship between buoyance of oil column in carrier beds and capillary pressure of pores,we determined the height of residual oil column and calculated the amount of residual oil in carrier beds.The results show that the amount of residual oil range from 184 to 259 million tons in the carrier beds of E3s1 and E3s2 in the Liaodong Bay depression,amounting to 7.4%-10.4% of the total hydrocarbon expulsion.Residual hydrocarbon in reservoirs is the main loss of hydrocarbon in the process of secon-dary migration.The key parameters for calculating residual oil have great impact on the accuracy of prediction.

Key words: lower limit of porosity, oil migration-accumulation range, height of residual oil column, amount of residual oil, Liaodong Bay

中图分类号: