基于ANSYS软件的降低破裂压力机理模拟

doi:10.11743/ogg20120420

摘要/Abstract

摘要：

针对深井压裂施工时各种降低破裂压裂方法的技术特点,基于ANSYS有限元软件,建立了裸眼完井和套管射孔完井两种应力计算模型,对压裂施工中井筒附近岩石应力变化进行了模拟计算,分析了不同深度的储层、不同岩石物性的储层及深穿透射孔和酸化预处理对储层的破裂压力的影响。结果表明,储层岩石力学性质中杨氏模量对破裂压力的影响较大,表现为随杨氏模量的增加,岩石破裂压力增加,而岩石的泊松比变化对破裂压力影响较小;酸化预处理可以降低岩石的杨氏模量;射孔深度不同,对降低破裂压力的作用随孔深的增加而减弱。在应用中应该根据情况选择优化孔眼长度。

关键词: ANSYS软件, 应力, 水力压裂, 破裂压力, 压裂开采

Abstract:

According to characteristics of various fracturing pressure reducing techniques for fracturing operation in deep wells,this paper established stress calculation models for open hole completion and casing-perforated completion using the ANSYS software,and calculated the rock stress near the wellbore during fracturing.We also analyzed the effects of various factors on fracturing pressure,such as reservoir burial depth,reservoir rock physical property,deep penetration perforation and acidification pretreatment.The results show that the Yang’s modulus of reservoir rock has great influence on the fracturing pressure.Fracturing pressure of rocks increases with the increasing Yang’s modulus.In contrast,Poisson’s ratio has less influence on the fracturing pressure.Acidification pretreatment may reduce the Yang’s modulus.The effect of perforating depth on reducing fracturing pressure decreases as the perforating depth increases.In field operation,the perforating depth needs to be optimized based on the well condition.

Key words: ANSYS, stress, hydraulic fracture, fracturing pressure, fracturing production

中图分类号:

TE357

苏建政,黄志文,龙秋莲,等. 基于ANSYS软件的降低破裂压力机理模拟[J]. 石油与天然气地质, 2012, 33(4): 640-645. doi: 10.11743/ogg20120420 Su Jianzheng,Huang Zhiwen,Long Qiulian,et al. ANSYS-based simulation of fracturing pressure reducing mechanism[J]. Oil & Gas Geology, 2012, 33(4): 640-645. doi: 10.11743/ogg20120420

参考文献

[1] 郑和荣,尹伟,胡宗全,等.中国中西部碎屑岩领域油气富集主控因素与勘探方向[J].石油与天然气地质,2010,31(6):753-762. Zheng Herong,Yin Wei,Hu Zongquan,et al.Main controlling factors for hydrocarbon accumulation and potential exploration targets in clastic sequences in western.central China[J].Oil & Gas Geology,2010,31(6):753-762.
[2] 李宗田,李凤霞,黄志文.水力压裂在油气田勘探开发中的关键作用[J].油气地质与采收率,2010,17(5):76-81. Li Zongtian,Li Fengxia,Huang Zhiwen.Key role of hydraulic fracturing in oil-gas field exploration and development[J].Petroleum Geology and Recovery Efficiency,2010,17(5):76-81.
[3] 李宗田.水平井压裂技术现状与展望[J].石油钻采工艺,2009,31(6):13-18. Li Zongtian.Prospect of horizontal well fracturing technology[J].Oil Drilling & Production Technology,2009,31(6):13-18.
[4] 张永贵,刘振峰.鄂尔多斯盆地北部上古生界致密砂岩气藏储层建模[J].石油与天然气地质,2011,32(4): 560-567. Zhang Yonggui,Liu Zhenfeng.Reservoir modeling of tight gas sands in the Upper Palaeozoic of the northern Ordos basin[J].Oil & Gas Geology,2011,32(4):560-567.
[5] 姜辉.浊流沉积的动力学机制与响应[J].石油与天然气地质,2010,31(4):428-435. Jiang Hui.Dynamical mechanism and depositional responses of turbidity current sedimentation [J].Oil & Gas Geology,2010,31(4):428-435.
[6] 马国刚,袁静.济阳坳陷古近系深层自生矿物及其与孔隙发育的关系[J].石油与天然气地质,2010,31(5):656-663,670. Ma Guogang,Yuan Jing.Relationship between authigenic minerals and porosity in the deep Paleogene formations of the Jiyang depression[J].Oil & Gas Geology,2010,31(5):656-663,670.
[7] 李勇明,郭建春,赵金洲.超深特低渗储层压裂改造技术关键与对策研究[J].钻采工艺,2007,30(2):56-58. LI Yongming,Guo Jianchun,Zhao Jinzhou.Key and counter measure of fracturing technique in ultradeep and low permeability reservoir[J].Drilling & Production Technology,2007,30(2):56-58.
[8] 刘一江,李相方.深层低渗储层压裂工艺优化技术[J].天然气工业,2005,25(8):94-96. Liu Yijiang,Li Xiangfang.Optimization of fracturing techniques for deep reservoirs with low perm eability[J].Natural Gas Industry,2005,25(8):94-96.
[9] 张广清,陈勉,殷有泉,等.射孔对地层破裂压力的影响研究[J].岩石力学与工程学报, 2003,22(1):40-44. Zhang Guangqing,Chen Mian,YinYouquan,et al.Study on influence of perforation on formation fracturing pressure[J].Chinese Journal of Rock Mechanics and Engineering, 2003,22(1):40-44.
[10] 任山,蒲春生,慈建发,等.深层致密气藏异常高破裂压力储层复合改造新工艺[J].钻采工艺,2011,34(3):41-45. Ren Shan,Pu Chunsheng1,Ci Jianfa,et al.New compound stimulation technology of deep tight gas reservoir with abnormal high fracture pressure[J],Drilling & Production Technology,2011,34(3):41-45.
[11] 苏建政.碳酸盐岩非均质性对水力裂缝起裂影响的有限元法研究[J].石油钻采工艺,2008,30(4):63-66. Su Jianzheng.Studying the effect of carbonatite heterogeneity on hydraulic fracture initiation by using finite element method[J].Oil Drilling & Production Technology,2008,30(4):63-66.
[12] 邓凡平.ANSYS10.0有限元分析自学手册[M].北京:人民邮电出版社,2009:27-50. Deng Fanping.ANSYS10.0 finite element analysis Self-study manual[M].Posts & Telecom Press,2009.
[13] 谢润成,韩振林,周文,等.深层致密砂岩气藏高异常破裂压力影响因素分析[J].石油钻采工艺,2009,31(5):60-65. Xie Runcheng,Han Zhenlin,Zhou Wen,et al.Analysis on factors inducing abnormal high fracture pressure of deep tight sandstone gas reservoir[J].Oil Drilling & Production Technology,2009,31(5):60-65.
[14] 邓燕,薛仁江,郭建春.低渗透储层酸预处理降低破裂压力机理[J].西南石油大学学报(自然科学版),2011,33 (3):125-129. Deng Yan,XuerenJiang,Guo JianChun.The mechanism of high-pressure high-temperature and low permeability acid pretreatment to reduce fracturing pressure[J].Journal of Southwest Petroleum University(Science & Technology Edition),2011,33 (3):125-129.
[15] 蔡希源.深层致密砂岩气藏天然气富集规律与勘探关键技术——以四川盆地川西坳陷须家河组天然气勘探为例[J].石油与天然气地质,2010,31(6):707-714. Cai Xiyuan.Gas accumulation patterns and key exploration techniques of deep gas reservoirs in tight sandstone:an example from gas exploration in the Xujiahe Form ation of the western Sichuan Depression,the Sichuan Basin[J].Oil & Gas Geology,2010,31(6):707-714.
[16] 程百利.腰英台油田压裂改造工艺技术研究[J].断块油气田,2011,18(1):123-125. Cheng Baili.Study on fracturing technology in Yaoyingtai Oilfield[J].Fault-Block Oil & Gas Field,2011,18(1):123-125.