水平井分段压裂产能电模拟实验方法

doi:10.11743/ogg20170219

摘要/Abstract

摘要： 为了对水平井分段压裂产能影响因素进行模拟，研究了一种水平井分段压裂产能电模拟实验方法。首先，根据水平井分段压裂后的实际地层情况，模仿研制了一套三维电场模拟装置；然后，根据要模拟的砂体展布特征、油气藏的流动边界类型、水平井在砂体中的井眼轨迹、地层渗透率及地层厚度等，设置电模拟的电解液和电解池尺寸等，根据水平井长度、裂缝高度、裂缝长度、压裂段数、裂缝条数和缝间距等，设置模拟井筒及裂缝；最后，通过采集电流信号，以确定产能的大小。利用该实验方法分别开展了针对某河流相沉积砂体的水平井压裂裂缝形态及位置优化模拟、裂缝条数及间距优化模拟和不同地层厚度对比模拟实验，优化出的结论及参数为现场实施提供了技术支持。这种电模拟实验方法能够精确模拟水平井压裂完井的各项参数对产能的影响，对水平井压裂完井设计具有一定指导意义。

关键词: 电模拟, 产能, 分段压裂, 水平井

Abstract: An electric simulation experiment procedure for predicting productivity of multi-stage fractured horizontal wells was proposed in the paper.Firstly,we developed a 3D electric field simulator based on the actual situation of reservoirs after a multi-stage fracturing in a horizontal well.Secondly,we set up parameters for an electrolyte and an electrolytic cell based on sandbody distributions,flow boundary types of reservoirs,well bore trajectory in sandbodies,permeability and thickness of reservoirs and etc.We then input parameters of simulated wellbores and fractures in accordance to the length of a lateral,height and length of fractures,numbers of stages,numbers of fractures,spacing between fractures and so on.Finally,we gathered electronic signals to predict the productivity.The procedure was applied to a fluvial sandbody to optimize geometry and placement as well as numbers and spacing of fractures in laterals based on comparative simulation experiments in reservoirs of different thickness.The results provided technological support to field operation.The procedure with its accurate simulation of the influence of fracturing parameters upon productivity of wells may be used as gui-dance for the design of horizontal well fracturing and completion.

Key words: electric simulation, productivity, staged fracturing, horizontal well

中图分类号:

TE357

刘长印,李凤霞,孙志宇,等. 水平井分段压裂产能电模拟实验方法[J]. 石油与天然气地质, 2017, 38(2): 385-390. doi: 10.11743/ogg20170219 Liu Changyin,Li Fengxia,Sun Zhiyu,et al. Electric simulation experiment procedure for predicting productivity of multi-stage fractured horizontal wells[J]. Oil & Gas Geology, 2017, 38(2): 385-390. doi: 10.11743/ogg20170219

参考文献

[1] 李宗田,苏建政,张汝生.现代页岩油气水平井压裂改造技术[M].北京:中国石化出版社,2015:127-129. Li Zongtian,Su Jianzheng,Zhang Rusheng.Modern fracturing technology of horizontal well in shale[M].Beijing:China Petrochemical Press,2015:127-129.
[2] 周德华,焦方正,葛家理.裂缝网络油藏水平井开发电模拟实验研究[J].石油实验地质,2003,25(2):216-220. Zhou Dehua,Jiao Fangzheng,Ge Jiali et al.Electric analogy modelling experiment of fracture network reservoir development by horizontal wells[J].Petroleum Geology & Experiment,2003,25(2):216-220.
[3] 魏建光,汪志明,张欣.裂缝参数对压裂水平井产能影响规律分析及重要性排序[J].水动力学研究与进展,2009,24(5):631-639. Wei Jianguang,Wang Zhiming,Zhang Xin.Influence of fissure feature parameters on the productivity of fractured horizontal wells and the ranking method[J].Journal of Hydrodynamics,2009,24(5):631-639.
[4] 牟珍宝,袁向春,朱筱敏.低渗透油藏压裂水平井产能计算方法[J].现代地质,2009,23(2):337-340. Mu Zhenbao,Yuan Xiangchun,Zhu Xiaomin.The calculating method of horizontal wells with hydraulic fractures for low permeability reservoirs[J].Geoscience,2009,23(2):337-340.
[5] 吴晓东,隋先富,安永生,等.压裂水平井电模拟实验研究[J].石油学报,2009,30(5):740-743. Wu Xiaodong,Sui Xianfu,An Yongsheng,et al.Electrolytic simulation experiment of fractured horizontal well[J].Acta Petrolei Sinica,2009,30(5):740-743.
[6] 明玉坤.分段压裂水平井注水开发电模拟实验[J].油气地质与采收率,2013,20(6):91-93. Ming Yukun.Water flooding electric simulation experiment in multi-staged fracturing horizontal well[J].Petroleum Geology and Recovery Efficiency,2013,20(6):91-93.
[7] 于姣姣,贾宗文,曲占庆,等.菱形联合井网整体压裂电模拟实验研究[J].科学技术与工程,2013,13(29):8612-8617. Yu Jiaojiao,Jia Zongwen,Qu Zhanqing,et al.Electrical simulation experiment of integral fracturing of diamond combined well pattern[J].Scienc Technology and Engineering,2013,13(29):8612-8617.
[8] 朱明.基于电模拟实验的多分支井产能研究[J].科学技术与工程,2012,12(9):20-38. Zhu Ming.Study on multi-lateral wells productivity based on electric analogy[J].Scienc Technology and Engineering,2012,12(9):20-38.
[9] 苏建政.水平井压裂选井选层技术探讨[J].断块油气田,2010,17(4):455-457. Su Jianzheng.Research on selection of well and formation for horizontal well fracturing[J].Fault-Block Oil & Gas Field,2010,17(4):455-457.
[10] 刘长印.不同类型油气井压裂选井选层影响因素分析[J].油气井测试,2009,18(1):32-35. Liu Changyin.Influence factors analysis in different types of oil and gas well candidates for hydraulic fracturing[J].Well Testing,2009,18(1):32-35.
[11] 唐汝众,温庆志.水平井分段压裂产能影响因素研究[J].石油钻探技术,2010,38(2):80-83. Tang Ruzhong,Wen Qingzhi.Factors affecting productivity of stage fractured horizontal well[J].Petroleum Drilling Techniques,2010,38(2):80-83.
[12] 刘忠群.鄂尔多斯盆地大牛地致密砂岩气田水平井开发气藏工程优化技术[J].石油与天然气地质,2016,37(2):261-266. Liu Zhongqun.Engineering optimization technique of horizontal well development for Daniudi tight sandstone gas field in Ordos Basin[J].Oil & Gas Geology,2016,37(2):261-266.
[13] 邓庆杰,胡明毅,胡忠贵,等.浅水三角洲分流河道砂体沉积特征——以松辽盆地三肇凹陷扶Ⅱ-Ⅰ组为例[J].石油与天然气地质,2015,36(1):118-127. Deng Qingjie,Hu Mingyi,Hu Zhonggui,et al.Sedimentary characte-ristics of shallow-water deltas distributary channel sand bodies:A case from Ⅱ-Ⅰ Formation of Fuyu oil layer in the Sanzhao Depression,Songliao Basin[J].Oil & Gas Geology,2015,36(1):118-127.
[14] 武恒志,叶泰然,赵迪,等.川西坳陷陆相致密气藏河道砂岩储层精细刻画技术及其应用[J].石油与天然气地质,2015,36(2):230-239. Wu Hengzhi,Ye Tairan,Zhao Di,et al.Fine characterization technique and its application to channel sandstone in continental tight gas reservoirs of western Sichuan Depression[J].Oil & Gas Geology,2015,36(2):230-239.
[15] 杨辰雨,田景春,张翔,等.基于砂体构型精细刻画潮坪砂坝优质砂体——以大牛地气田D17井区太原组2段为例[J].石油与天然气地质,2015,36(2):248-254. Yang Chenyu,Tian Jingchun,Zhang Xiang,et al.Configuration-based fine description of high-quality sand bodies in tidal-flat bar-Taking the tight sandstone reservoir in the 2nd member of the Taiyuan Formation in D-17 well block in Daniudi gas field as an example[J].Oil & Gas Geology,2015,36(2):248-254.
[16] 郭智,贾爱林,何东博,等.鄂尔多斯盆地苏里格气田辫状河体系带特征[J].石油与天然气地质,2016,37(2):197-204. Guo Zhi,Jia Ailin,He Dongbo,et al.Characteristics of braided river sedimentary system zones in Sulige gas field,Ordos Basin[J].Oil & Gas Geology,2016,37(2):197-204.