塔里木盆地玉北1井背斜带变形特征与形成机制

doi:10.11743/ogg20130212

摘要/Abstract

摘要：

塔里木盆地玉北1井构造带形成过程与变形机制的解析,是揭示该带碳酸盐岩储层发育与展布规律的重要环节。断层及背斜轴面分析表明,该带发育两种类型构造。一种是贯穿南北的正花状构造;另一种上下构造层构造形态差异明显。上部为对称背斜,受高角度走滑断层控制;下部为不对称背斜,受沿寒武系膏盐层发育的逆冲断层控制。研究表明,玉北1井构造带定型期为中加里东期,此后至少叠加了晚加里东期与海西晚期两次区域变形。构造带沿走向主干断层倾向发生变化,自北向南由逆冲向走滑构造转变。在两条主干断层交汇部位背斜最发育,其核部有寒武系膏泥岩的汇聚,形成了剪切-挤压断层转折背斜。由此推断,构造带奥陶系碳酸盐岩层系不仅存在加里东期、晚海西期两期隆升剥蚀,而且在剪切-挤压背斜顶部、层间发育的高角度、低角度裂缝都为岩溶的形成提供了有利条件。

关键词: 形成机制, 构造样式, 储层类型, 玉北1井, 塔里木盆地

Abstract:

Interpretation of the development process and forming mechanism of Well Yubei 1 anticline belt in the Tarim Basin is an important part of study to map the carbonate reservoirs.Analysis of faults and axial planes of the anticlines reveals that two structural styles occur in the study area.One is positive flower structure which runs through the anticline belt in N-S direction.The other one shows significant difference in structural style between upper and lower structural layers.The upper layer is a symmetry anticline and is controlled by a high angle strike slip fault.The lower layer is a dissymmetry anticline and is controlled by a thrust fault developed along the Cambrian gypsiferous mudstone layer.Well Yubei 1 anticline belt was finalized in the mid-Caledonian period,and experienced at least two regional deformations in the late-Caledonian and late-Hercynian.However,the anticline belt changes along the inclination of the anticline,and is converted from a thrust structure to a strike-slip structure in N-S direction.The anticlines are most highly developed at the intersection of two main faults.The Cambrian gypsiferous mudstone was deposited at its core,resulting in a shear-compression anticline.On this basis,we believe that the Ordovician carbonate sequence not only experienced two stages of uplifting and erosion in the Caledonian and early Hercynian and the high angle and low angle fractures developed in the anticlines formed by shear-compression all which provided good conditions for the karstification.

Key words: forming mechanism, structural style, reservoir type, Well Yebei 1, Tarim Basin

中图分类号:

TE121.1

云金表,周波,王书荣. 塔里木盆地玉北1井背斜带变形特征与形成机制[J]. 石油与天然气地质, 2013, 34(2): 215-219. doi: 10.11743/ogg20130212 Yun Jinbiao,Zhou bo,Wang Shurong. Deformation characteristics and forming mechanism of the Well Yubei 1 anticline belt in the Tarim Basin[J]. Oil & Gas Geology, 2013, 34(2): 215-219. doi: 10.11743/ogg20130212

参考文献

[1] 夏义平,徐礼贵,刘万辉,等.地震解释及综合研究中几个问题的探讨[J].石油地球物理勘探,2005,40(增刊1):1-5. Xia Yiping,Xu Ligui,Liu Wanghui,et al.Discussion of some problems between seismic interpretation and reasearch[J].Oil Geophysical Prospecting,2005,40(S1):1-5.
[2] 何登发,杨庚,管树巍,等.前陆盆地构造建模的原理与基本方法[J].石油勘探与开发,2005,32(3):7-14. He Dengfa,Yang Geng,Guan Shuwei,et al.Principles and methodology of structural modeling in foreland basins[J].Petroleum Exploration and Development,2005,32(3):7-14.
[3] Dahlstrom C D A.The upper detachment in concentric folding[J].Bulletin of Canadian Petroleum Geology,1969,17:336-344.
[4] Suppe J.Geometry and kinematics of fault-bend folding[J].American Journal of Science,1983,283:684-721.
[5] Jamison W R.Geometric analysis of fold development in over-thrust terranes[J].Journal of Structural Geology,1989,9:207-219.
[6] Suppe J,Medwedeff D.Geometry and kinematics of fault-propagation folding[J].Eclogae Geologicae Helvetiae,1990,83:409-454.
[7] Mitra S.Fault-propagation folds:geometry,kinematic evolution,and hydrocarbon traps[J].AAPG Bulletin,1990,74:921-945.
[8] Dahlstrom C D A.Geometric constraints derived from the law of conservation volumn and applied to evolutionary models for detachment folding[J].AAPG Bulletin,1990,74:336-344.
[9] Medwedeff D.Geometry and kinematics of an active,laterally propagating wedge thrust,Wheeler Ridge,California[C]//Structural geology of fold and thrust belts.Baltimore:John Hopkins University Press,1992:3-28.
[10] Shaw J H,Hook S C,Suppe J.Structural trend analysis by axial surface mapping[J].AAPG Bulletin,1994,78(5):700-721.
[11] Epard J L,Groshong R H.Kinematic model of detachment folding including limbrotation,fixed hinges and layer-parallel strain[J].Tectonophysics,1995,247:85-103.
[12] Poblet J,Mcclay K.Geometry and kinematics of single-layer detachment folds[J].AAPG Bulletin,1996,80(7):1085-1109.
[13] Erslev E A.Trishear fault-propagation folding[J].Geology,1997,19:617-620.
[14] Hardy S,Ford M.Numerical modeling of trishear fault propagation folding[J].Tectonics,1997,16:841-854.
[15] Allmendinger R W.Inverse and forward modeling of trishear fault-propagation folds[J].Tectonics,1998,17:640-656.
[16] Novoa E,Mount V,Suppe J.Map-view interference of mono-clinal folds[J].Journal of Structural Geology,1998,20:339-353.
[17] 李曰俊,吴根耀,孟庆龙,等.塔里木盆地中央地区的断裂系统:几何学、运动学和动力学背景地质科学[J].地质科学,2008,43(1):82-118. Li Yuejun,Wu Genyao,Meng Qinglong,et al.Fault systems in central area of the Tarim Basin:geometry,kinematics and dynamic settings[J].Chinese Journal of Geology,2008,43(1):82-118.
[18] Finch E,Hardy S,Gawthorpe R.Discrete element modelling of contractional fault-propagation folding above rigid basement fault blocks[J].Journal of Structural Geology,2003,25:515-528.
[19] Shaw J H,Connors C,Suppe J.Seismic interpretation of contractional fault-related folds:an AAPG seismic atlas[M].American Association of Petroleum Geologist's Special Publication,2004:1-270.
[20] Sylvester G.Strike-slip faults[J].Geological Society of America Bulletin,1988,100:1666-1703.
[21] 管树巍,杨海军,韩剑发,等.塔中低凸起的构造属性和解释方法[J].石油与天然气地质[J].2011,32(54):777-785. Guan Shuwei,Yang Haijun,Han Jianfa,et al.Structural properties and interpretation methods of the Tazhong Low Salient[J].Oil & Gas Geology,2011,32(54):777-785.
[22] Shaw J H,Bilotti F,Brennan P.Patterns of imbricate thrusting[J].Geological Society of America Bulletin,1999,111(7):1140-1154.
[23] Wilkerson M S,Dicken C L.Quick-look techniques f or evaluating two-dimensional cross sections in detached contractional settings[J].AAPG Bulletin,2001,85(10):1759-1770.
[24] Johnson K M,Johnson A M.Mechanical analysis of the geometry of forced-folds[J].Journal of Structural Geology,2002,24:401-410.