石油与天然气地质 ›› 2021, Vol. 42 ›› Issue (4): 863-872.doi: 10.11743/ogg20210408

• 油气地质 • 上一篇    下一篇

川东北元坝地区须家河组三段基于相控的相对优质储层预测

黄彦庆(), 刘忠群, 林恬, 肖开华, 王爱, 薛明喜, 霍志周   

  1. 中国石化 石油勘探开发研究院, 北京 100083
  • 收稿日期:2020-10-19 出版日期:2021-08-28 发布日期:2021-08-27
  • 第一作者简介:黄彦庆(1980-), 男, 高级工程师, 油气藏评价。E-mail: huangyq.syky@sinopec.com
  • 基金项目:
    中国石化科技部项目(P19012-2);中国石化科技部项目(P18089-4)

Lithofacies-based prediction of relatively high-quality reservoirs of the Xu 3 Member in Yuanba area, northeastern Sichuan Basin

Yanqing Huang(), Zhongqun Liu, Tian Lin, Kaihua Xiao, Ai Wang, Mingxi Xue, Zhizhou Huo   

  1. Petroleum Exploration and Production Research Institute, SINOPEC, Beijing 100083, China
  • Received:2020-10-19 Online:2021-08-28 Published:2021-08-27

摘要:

川东北元坝地区须家河组三级储量规模大,但储量探明率低、试采效果差。其主要原因是致密砂岩储层非均质性强,相对优质储层分布不明。因而采用了先精准预测砂砾岩,然后在砂砾岩中寻找相对优质储层的思路开展研究。在单井沉积微相划分基础上,通过岩性逐级识别,实现岩性准确解释;进而分析须家河组三段各砂组顶、底界面处岩性组合及其地震响应特征,明确地震剖面上波峰和波谷的地质含义,同时考虑井-震分层的差异,多方法确定提取地震属性时的合理时窗,进而提取相应范围内、不受上、下地层影响的多种地震属性,以钻井结果为比照,优选对砂砾岩最为敏感的地震属性,井-震结合,刻画须三段砂砾岩的展布。为了进一步搞清楚砂砾岩中相对优质储层段,应用岩心资料,对砂砾岩细分岩石相,明确了须三段发育中-粗粒钙屑砂岩和砂质细砾岩两类相对优质储层,建立其测井解释标准,在砂砾岩展布的约束下,精细刻画了两类相对优质储层的分布,为须三段气藏下一步规模有效开发奠定了坚实基础。

关键词: 地震属性, 岩石相, 沉积微相, 优质储层, 致密砂岩, 储层预测, 须家河组, 川东北元坝地区

Abstract:

The 3P reserves of the Xujiahe Formation are large in scale in Yuanba area.However, due to the strong heterogeneity of tight sandstones, and less understanding on the distribution of relatively high-quality reservoirs, the proportion of proven reserves is low in the 3P reserves and the production tests are poor in effect.It is necessary to accurately predict the distribution of coarse siliciclastic rocks, from which relatively high-quality reservoirs are to be discovered.On the basis of sedimentary microfacies division by using well data, precise lithologic interpretation is achieved by gradual lithologic identification.The geological significance of peaks and troughs on seismic sections is clarified by analyzing the lithological associations on the top and bottom surfaces for various sand groups in the 3rd member of Xujiahe Formation (hereinafter referred to as Xu 3 Member); meanwhile, multiple methods are applied to select proper time window for extracting seismic attributes given the gap in seismic-well layering, and several seismic attributes that are not influenced by the overlying and underlying formations are extracted within the time window.In regard of the drilling data, we select the seismic attributes that are the most sensitive to coarse siliciclastic rocks and use them to map the distribution of the coarse siliciclastic rocks via seismic-well tie.On the other hand, to identify the relatively high-quality reservoirs within coarse siliciclastic rocks, we sub-divide the coarse siliciclastic rocks in lithology with core data, confirming that there are two categories of high-quality reservoirs well developed in the Xu 3 Member, that is, the medium-to-coarse-grained calcarenaceous sandstone reservoir and fine-grained arenaceous conglomerate reservoir.Furthermore, the distribution of the two categories of high-quality reservoirs is finely depicted under the constraint of the coarse siliciclastic rock distribution while establishing well logging interpretation criteria.The results serve to lay a sound basis for the large-scale development of the Xu 3 Member gas pools in high efficiency.

Key words: seismic attributes, lithofacies, sedimentary microfacies, high-quality reservoir, tight sandstone, reservoir prediction, Xujiahe Formation, Yuanba area in northeastern Sichuan Basin

中图分类号: